When we conceived this section for PotCon ™ Hermetic Connectors, our first priority was to make it a truly useful document for designers…with particular emphasis on a "Single-Page-lookup" concept of its organization.

Our motivation to do this was our own confusion and frustration with "classic" connector catalog pages. A quick search for a specific connector set soon degenerated into a multi-page and sometimes multi-catalog task.

This catalog section is the result of the single-page-lookup challenge. With just one look at the table of contents you can identify the page which covers your mounting and connector configurations.

We have then listed on that one page a complete compilation of a wide selection of contact configurations from the three most popular connector series...but in hermetically sealed versions. As an additional benefit, if you need to purchase mating connector sets or mating harness and connector assemblies, you can easily specify them from the same page.

Of particular note should be our "In-Line" PotCon ™ Connector which allows you to mate your inside and outside cable sets with or without the bulkhead feedthru. This was accomplished by our arrangement of plugs/receptacles and pins/sockets on both sides of the fiber optic bulkhead connector to allow the connection. Please look at our PBTR and RBTP for these features.

In addition to our standard line of hermetic sealed connectors, we have also offered a very comprehensive, complimentary line of our hermetically sealed wire harnesses in some of the other sections. This approach can offer significant technical, cost and lead time benefits over the classic bulkhead mounted connectors. These advantages are particularity great in the case where thermocouple alloys are to be routed through the bulkhead or port.

Requests from our customers for a a complete line of high frequency and high voltage hermetic feedthrus for coaxial cable connectors has prompted the expansion of our product line to include bulkhead feedthrus incorporating coaxial cable connectors.

We have also introduced a full line of hermetically sealed fiber optic feedthru connectors in both bulkhead face seal mountings and in vacuum flanges.

For those applications that require ultra clean components we have introduced a Vacuum Outgassing Service which offers to thoroughly clean components. Please refer to the Unique Feedthrus section of this catalog for further information. We have also "packaged" two of the more popular PotCon ™ connectors (37 pins and 128 pins) as “kits” for your ordering convenience. Click here for more detail.

If you can't find one of our standard PotCon ™ Connector products to solve your problem, feel free to call us Toll Free at 1.800.533.8068 for a full discussion of alternates or custom designed feedthroughs for your specific application.

Challenge Us!!!!